10G OEO Converter Card XFP to XFP 3R Repeater 10G Fiber Channel
10G OEO Converter 3R Repeater Card is XFP to XFP Slot (with SFP+ to SFP+, SFP+ to XFP slot optional), which uses optical-electricity-optical conversion principle to realize optical signal regeneration, enabling of the optical signal amplification and regeneration, re-timing, and wavelength conversion, with coarse/dense wavelength division multiplexing together to realized WDM transmission. It is now possible to quickly improve communication capacity, expand the bandwidth on present network, while using low-cost, high cost-effective solutions to manage and run the system, easy operation.
The XFP to XFP 10G Fiber Converter Card can be used in 16-slot multifunctional management system, which is a Ethernet and SDH transmission equipment,support mutiple services including managed media converter card, OEO Converter card, 1+1 protection switching card, CWDM/DWDM MUX/DEMUX Card, etc., supports protocols like SNMP, WEB, CONSOLE and TELNET, with a strong management function, and operate easily to meet different customer's requirement.
Key Features
- Supporting XFP to XFP
- Supporting 3R Repeater
- Supporting SONET OC192,SDH STM-64,10G WAN,10G LAN, ONT OUT-2,10G LAN witch 255/237 FEC coding, 10G Fiber Channel,10G POS
- Supporting 10Gbase-SR/LR to 10Gbase-SR/LR
- Supporting 9.95Gbps~11.32Gbps
- Short delay time when transparent transmission
- Supporting Jumbo frame
- Supporting DMI (Diagnostic Monitoring Interface) function of optical transceivers
- Supporting 850nm, 1310nm, 1550nm and DWDM/CWDM wavelength ruled by ITUT
- With powerful network management function, supporting WEB and SNMP
- Supporting hot plug
- Easy installation with complete LED indicators for working situation
- Supporting 2U chassis (16 slots) and standalone chassis. Standalone chassis with internal special communication power supply, chassis support dual redundant power supply(support OLP function)
Specification
| Technical Parameter |
| 3R Repeater | Support |
| Transmission Speed | 10Gb/s (9.95Gb/s-11.32Gb/s) |
| Protocols | IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM) |
| Access Type | 10G LAN/ 10G WAN |
| Interface Type | Type A: XFP To/From XFP |
| Type B: SFP+ To/From SFP+ |
| Type C: SFP+ To/From XFP |
| Transmission Distance | XFP/SFP+ module: up to 80Km |
| Maximum Packet | 14,880,950/S |
Network
Management | • Card type information |
| • SFP+ or XFP fiber module detection |
| • SFP+ or XFP fiber module DMI function (Temperature,Voltage, Optical power) |
| • Link status detector |
| • Enable/Disabled Loopback test function |
| • Enable/Disable PRBS Generator and checker function |
| • Rate select 10Gbase-Lan or Wan) |
| • Remote card's status monitor (only in pairs) |
| Power requirement | Rack-mountable : AC 85~ 220V or DC 48V |
| Standalone: AC 220V or DC 48V |
| Power consumption: ≤15W |
| Work Environment | Operating Temp: 0~ 50 ℃ |
| Storage Temp: -10~ 70 ℃ |
| Humidity: 5%~90% (non-condensing) |
| Dimension | Standalone: 156mm (W) × 128mm (D) × 32mm (H) |
| Card: 115mm (W) × 78mm (D) |
Ordering information
| P/N | Description | Remarks |
| FR-6603R-XX | 10G OEO Converter Card (3R Repeater) | XFP to XFP |
| FR-6603R-SX | 10G OEO Converter Card (3R Repeater) | SFP+ to XFP |
| FR-6603R-SS | 10G OEO Converter Card (3R Repeater) | SFP+ to SFP+ |
Product Tags:
|
|
10G OEO Converter Card XFP to XFP 3R Repeater 10G Fiber Channel Images
|
